新闻资讯

News Center

current position: Home > News Center > 黑龙江Technical Information

黑龙江Some Functions of Industrial Light Burned Magnesium Powder

2023-03-01 09:04:23
times

As for the functions of industrial light burned magnesium powder, there are 12 points to be discussed here for the special magnesium oxide mesh for friction materials. Therefore, taking a look at the following explanations, you may have a better understanding of which is the best one for leather sand


1、 Special magnesium oxide for adhesives: Used in high-end adhesives, it has many advantages, such as high iodine absorption value, good dispersibility, and low iron content. It can effectively prevent delamination and precipitation of the glue liquid by boiling with resin, improve the transparency and heat resistance of the glue liquid, and improve the storage stability of the glue liquid.


2、 Feed grade magnesium oxide: An additive used in animal feed to prevent animal feed nervous system diseases caused by magnesium deficiency.


3、 Special magnesium oxide for cable rubber: Used in rubber sheathed cables, mining cables, marine cables, and other industries, it can improve the anti-corrosion, acid resistance, high temperature resistance, and other performance of cables, improving working stability under harsh conditions.


Light burned magnesium powder


4、 Special magnesium oxide for brake pads: mainly used as wear-resistant materials, high temperature resistant and flame retardant, improving material stability, and other characteristics.


The rotary kiln incinerator, also known as a rotary kiln, is a slightly inclined steel hollow cylinder lined with fire resistant bricks. Most waste materials are heated by the gases generated during the combustion process and the heat transmitted by the kiln walls. Solid waste is fed into the kiln from the front end for incineration, and is rotated to achieve the purpose of mixing the waste. Proper inclination must be maintained during rotation to facilitate the sliding of solid waste. In addition, waste liquid and waste gas can be fed from the kiln head or secondary combustion chamber, and even entire barrels of waste can be sent to the rotary kiln incinerator for combustion.


Combine four universities: building science, materials science, fire science, and environmental protection science. Deviation from the four university disciplines has one-sidedness and limitations. The following points need to be done well for fire prevention of external wall insulation:


Strictly implement the fire protection regulations and system


2. Choose a good insulation system and select high-quality insulation materials


3. Take preventive and control measures at all stages of the installation of the insulation system


4. After the thermal insulation material is lightly burned with magnesium powder and made into an external wall thermal insulation system, the correct use of the thermal insulation system and the prevention of fire should be completed


The widespread use of light burned magnesium powder on building exterior walls makes it necessary to consider both internal and external fire prevention issues. Only by carefully learning from relevant domestic fire accidents, recognizing the root causes of external wall insulation material fires, and taking effective safety measures.

Tags

Recently Viewed:

Related products

news.related_news